Очиститель воды 352净水器S100

Optimize RFID identification of filter element

1. Temperature sensor fault, the machine does not produce water, then the tap indicator light flashing 6 times, and then off. 2. If the filter element is not identified or THE TDS fault does not affect the water production of the machine, flash for 3 seconds and steady on for 1 second.

The problems existed in the calculation of the life of the composite filter element were repaired

1. Optimized the washing function and added the manual washing function. Short press the heating button switch, then the machine will start washing in standby mode. 2. In standby state, the panel indicator light goes out. 3. RFID filter element identification is optimized. 4. Optimized the calculation of filter element life, and the machine can make water normally without identifying RFID.